It is quite common for Windows users to encounter the “error code 0x80070002” while trying to install a Windows update. The error usually occurs when the Windows update is successfully downloaded, but couldn’t be installed by the system. If you’ve also encountered the same error 0x80070002 on your PC, don’t panic as you can fix the issue without any hassle.
Here is a list of the most effective methods to troubleshoot and fix error code 0x80070002 and install the Windows update without any interruption.
Why Does Error 0x80070002 Occur?
Windows update error 0x80070002 usually occurs when a few update files are either missing or have gone corrupted. Even if the update has been successfully downloaded and extracted, it is quite common for a few files to get corrupted during the process. As a result, the update will either completely fail to install or get uninstalled automatically.
So, let’s quickly move towards the working solutions to fix the Windows update error 0x80070002 and install the latest updates on your system.
Basic Solutions to Fix Windows Update Error 0x80070002
It is worth noting that there’s no one universal solution to fix this type of error. Here we’ve mentioned different working solutions that you can try on your system to quickly fix the error. You can try all these solutions and stick to the one that delivers the desired results.
1. Check Internet Connection and Disk Space
Before anything else, make sure that you have a stable Internet connection to download the files without any interruptions. In many cases, a poor Internet connection is the main reason why an update file can get corrupted and make your system run into an update error.
Apart from your Internet connection, it is also important to have enough space on your hard disk so that the “Windows Update File” can be downloaded successfully. The file size can vary from 2GB-4.5GB. So, make sure to at least have 5GB of free disk space on your system.
2. Check and Correct System Time & Date
While it may seem a bit surprising, incorrect date and time can also cause the Windows update error 0x80070002. If that’s the case, all you have to do is set the correct date & time as per your location and you won’t face the update error anymore.
Follow these instructions to set the correct date & time on your system.
Step 1 — Right-click the clock icon in the bottom-right corner of your taskbar and click “Adjust Date/Time”.
Step 2 — In the next window, toggle the switch off to disable the “Set Time Automatically” setting.
Step 3 — You’ll be prompted to a new window where you can set the correct date & time according to your current location.
Step 4 — Click “Change” to implement the changes.
3. Disable Any Security Software
If you’re using an Antivirus program or other type of security software, make sure to disable it before installing the update. These types of programs can interfere with the Windows update process and cause your system to encounter the error 0x80070002. Apart from this, make sure to disconnect from a VPN tool as this can also cause the Windows update error.
4. Check for Latest Updates
If a third-party application is restricting you from installing the update, you can boot your system into a clean boot state and check for the latest updates. A clean boot is a state when Windows doesn’t load any third-party services. It means that if a third-party program is causing the update error, using a clean boot to install the update will fix the issue immediately.
Step 1 — In the Run window, type “msconfig” and press enter.
Step 2 — Go to the “Services” tab and check “Hide All Microsoft Services”. Now, click “Disable All” to disable all the third-party services.
Step 3 — Restart your system and go to Settings>update & security>windows update >check for updates to look for the latest updates.
5. DISM.exe /Online /Cleanup-image /Restorehealth
You can also fix the Windows update error 0x80070002 using the DISM tool.
Step 1 — Open Command Prompt as an Administrator and execute the following command.
DISM.exe /Online /Cleanup-image /Restorehealth
Step 2 — This process can take a while. Once the command is executed successfully, restart your system and try installing the Windows update again.
6. Run System File Checker Utility
SFC is a built-in Windows utility that’ll automatically find and fix the corrupt/missing system file on your PC. Follow these instructions to fix the Windows update error using SFC utility.
Step 1 — Open Command Prompt as Administrator and execute the following command.
Step 2 — Wait for a couple of minutes and let the utility re-install the corrupted system files.
Other Working Solutions
If the above methods don’t fix the Windows update error 0x80070002, you might consider advanced solutions. Some of these solutions include.
1. Reset Windows Update Components
One of the ways to fix the update error is to reset Windows update components and manually delete the corrupted update files. Once the files are deleted, you can replace them with fresh files by downloading them from the server.
Step 1 — Press “Windows+R” and type “services.msc”.
Step 2 — Right-click the “Update” services and click “Stop”.
Step 3 — In the same way, disable the “Background Intelligent Transfer Service (BITS) and Superfetch” services.
Step 4 — Now, go to “C:WINDOWSSoftwareDistributionDownload” and delete everything from the folder.
Step 5 — Go back to the services window, and restart the Update services that you disabled earlier.
Now, check for updates again and see if you still face the update error or not.
2. Run Windows Update Troubleshooter
If you’re still facing the same issue, Windows Update Troubleshooter will be your best solution to fix the error 0x80070002. The troubleshooter will automatically identify and fix the issue that’s preventing the Windows update to install successfully.
3. Tweak Windows Registry to Fix Windows Update Error
In many cases, modifying the registry editor can also fix the update error. Follow these steps to tweak the Windows registry editor on your system.
Step 1 — Type ”regedit” in the “Run” window and press enter.
Step 2 — Go to HKEY_LOCAL_MACHINESOFTWAREMicrosoftWindowsCurrentVersionWindowsUpdateOSUpgrade and select OSUpgrade. Right-click in an empty area and select New>DWORD (32-bit) Value.
Step 3 — Again right-click the newly created DWord value and tap Modify. Now, simply change the value data to 1 and select Hexadecimal. Click “Ok” to save to registry modifications.
4. Change DNS Address
Another effective solution to fix the error would be to change the DNS address. Follow these instructions to change the DNS address on your system.
Step 1 — Open the “Network Connections” window and click “Properties”.
Step 2 — Select “Internet Protocol Version 4 (TCP/IPv4)” and again tap “Properties”.
Step 3 — Select the “Use Following DNS Server Address” to manually enter the DNS address.
Step 4 — Now, set the “Preferred” DNS Server to 126.96.36.199 and “Alternate” DNS server to 188.8.131.52.
Once the DNS server has been ch
anged, go to the Windows Update option and check for updates again.
There are a few of the solutions to fix the Windows update error 0x80070002 and install the latest updates without facing any issues whatsoever.